Geothermal energy plays an important role in urban construction of the Xiong’an New Area. Geothermal reservoir fracture distribution of the Mesoproterozoic Jixianian Wumishan Formation (Fm.) carbonate reservoir in the Rongcheng geothermal field are evaluated based on FMI log from Wells D19 and D21. The results show carbonate reservoir fracture density of Well D19 is 15.2/100 m, greater than that of Well D21 with a value of 9.2/100 m. Reservoir porosity and permeability of Well D19 are better than that of Well D21, and the water saturation is bimodally distributed. The movable fluid volume ratio (BVM) of Well D19 is 2% to 8% with some zones exceeding 20%, while the value of Well D21 is less than 4%. Therefore, reservoir fractures in Well D19 are more conducive to fluid flow. Reservoir fractures have a similar occurrence to normal faults, indicating that the tensile stress field controlled the formation of such fractures. Developed reservoir fractures provide a good channel for groundwater convection. The circulation of regional groundwater and the heat exchange between water and rock and the multiple heat accumulation patterns form a stable and high potential heat reservoir in the Rongcheng geothermal field. 相似文献
确定土体动剪切模量的常用方法有规范法、Kumar法和自相关函数法,确定相应阻尼比的方法有规范法、Das and Luo法、Kokusho法、Kumar法和互相关函数法,为了分析不同方法所产生差异,实现定量化对比分析,笔者以福建标准砂（粒径为0.5~1.0 mm）为研究对象,采用不排水的应力控制动三轴试验,探讨不同的确定土体动剪切模量和阻尼比方法的差异性,并给出了不同土体条件建议选用的方法。结果表明：1）3种方法确定动剪切模量的结果有一定的差异,随剪应变的增大结果的差异逐渐增大,有效围压对结果的差异性有所影响,当剪应变为4×10-3,有效围压为100 kPa时,3种方法差异显著,相对误差最大接近20%;2）而5种方法确定阻尼比的结果差异显著,随着剪应变的增大,5种方法确定的阻尼比相对误差大体上均在迅速减小,只有规范法在有效围压为100 kPa时,其相对误差有较小的增大趋势;5种方法中,Kumar法确定的阻尼比最接近平均阻尼比,互相关函数法远高于平均阻尼比,Das and Luo法和Kokusho法确定的阻尼比基本一致但低于平均阻尼比。建议以后的工程应用中,加载方式为应力控制时,可采用自相关函数法确定动剪切模量,采用Kumar法确定阻尼比,二者确定的动剪切模量和阻尼比均最接近平均值。 相似文献
Hydraulic fracturing is an essential technology for the development of unconventional resources such as tight gas. The evaluation of the fracture performance and productivity is important for the design of fracturing operations. However, the traditional dimensionless fracture conductivity is too simple to be applied in real fracturing operations. In this work, we proposed a new model of dimensionless fracture conductivity (FCD), which considers the irregular fracture geometry, proppant position and concentration. It was based on the numerical study of the multistage hydraulic fracturing and production in a tight gas horizontal well of the North German Basin. A self-developed full 3D hydraulic fracturing model, FLAC3Dplus, was combined with a sensitive/reliability analysis and robust design optimization tool optiSLang and reservoir simulator TMVOCMP to achieve an automatic history matching as well as simulation of the gas production. With this tool chain, the four fracturing stages were history matched. The simulation results show that all four fractures have different geometry and proppant distribution, which is mainly due to different stress states and injection schedule. The position and concentration of the proppant play important roles for the later production, which is not considered in the traditional dimensionless fracture conductivity FCD. In comparison, the newly proposed formulation of FCD could predict the productivity more accurately and is better for the posttreatment evaluation.
Acta Geotechnica - A systematical testing program on frozen Onsøy clay under isotropic loading and undrained shearing at different temperatures... 相似文献
